300×600mm dimmable panel light
Product technical parameters
Product Model: PT-P3030-18W
Rated Power: 40W±5%
Input voltage: 100V-240V AC，Max277V
Input Current: Max 0.7A
Working Frequency : 50/60Hz
Power Factor: ＞0.90
Power efficiency: ≥86%
Output voltage/current: 27-42VDC/500mA±5%
Lumen for Single led: ≥55-60lm/150mA
LED Chip: SMD4014/SMD2835
LED Qty: 120PCS
Luminous flux: 3400±10%LM
Beam angle: 120°
Work temperature: -20~+45℃
Storage temperature: -30~+65℃
Life time: 30,000H
This product apply to office building, shopping mall, super market, school, hospital, hotel, parking lot, workshop, government projects, family etc.
1). Energy-saving: adopt low power SMD4014 & SMD2835 lighting source, saving 80% energy than incandescent lamp
2). ECO- Friendly: No Hg or Pb etc harmful substance, pollution-free for environment, no infrared or UV, avoid the harm for human body, belong to green lighting product.
3). Long Lifespan: over 30,000hours
4). This product use small power chip to avoid the highly-focus heating source, also use high efficiency heat-conducting silicone pad to increase the lifespan of lamp.
5). Adopt the constant current led driver, no strobe.
6). Unique lighting emitting design, adopt high quality light guide plate to form even, soft and comfortable light.
7).energy saving: low power consumption,low heat,high level of brightness,uniform light-emitting,energy-saving about 50%.
8). long serving life:the normal serving life of LED light tube is above or equal to 50.000H
9). no twinkling:rapid start,steady work,no noise,no twinkling can effectively protect the eyes.
10). green and environmentally-friendly:LED lump has no ultraviolet or infrared radiation,containing no mercury ,lead and heavy metal.
11). special circuit design :ensure that each LED to work independently,,the damage of single LED has no influence on the whole.
Surface Of lamp
Sliver & White
6063 Aviation Aluminum
One LED broken down, others can be work normally
PMMA LGP +PS/PC Diffuser
LED SMD2835 &SMD4014
TUV \CUL\SAA\ENEC\FCC\CE\PSE etc approval
1. A professional person who have electrician certificate to install the lamp
2. To check the completeness of the lamp when you take it out from the carton
3. The lamp should at least keep 0.2m distance from the inflammable material, make sure the mounted ceiling is 2cm distance, and the lamp cannot be entirely installed inside the ceiling, or the heat source wall. Separate the low voltage and high voltage wire.
4. The line of the lamp can go through from the hole and fixed with cable clip
5. Make sure the power line of the lamp have enough length, free from tension and tangential force. Don't pull the link line strongly. Don't let the link line tie a knot. Distinct the output link line. Don't mix with other lamps.
6. When the lamps are well installed, connect the plugs of lamp and switching power supply
7. Connect the wire of switching power supply with mains supply, usually the Brown (or black) is live line, blue is null line.
8. Use the led driver, not mix with other lamps
9. Don't tear off the nameplate of the led driver.
0.9KG 2pcs/Inner box
Transportation and storage requirements
1. Stick the main mark and side mark on the carton, also stick the label on the lamp.
2. Pack it well, handle it gently, write product name and quantity on the carton.
3. Storage requirements: damp-proof, dust-proof, prevent pressing and falling down, avoid the sunlight shine directly and the moisture condensation.
4. Storage life: 1 Year. Recheck the electric properties of lamp when it is over the validity.