LED Strip Light Led light belt is the LED assembly in the ribbon FPC (flexible circuit board) or PCB hard board, because its product shape like a tape named after the same. Because the long life (generally normal life of 8 to 10 million hours), and very energy efficient and green and gradually in a variety of decorative industries cut a striking figure.
LED Strip Light LED lights with a conventional section is divided into flexible LED lights and LED light bar two, but generally also includes the connection with LED wire of the old lights, such as flat three-wire 4.3W / m, flat four-wire 6.48W / m, flat five 8.64W / meter light belt and so on.
1, flexible LED lights with FPC is to do assembly circuit board, with SMD LED assembly, the thickness of the product is only a coin thickness, no space; general specifications are 30cm long 18 LED, 24 LED and 50cm long 15 LED, 24 LED, 30 LED and so on. There are 60cm, 80cm, etc., different users have different specifications. And can be arbitrarily cut, can also be arbitrarily extended and light is not affected. The FPC material is soft, can be bent, folded, winding, can be moved in three-dimensional space and telescopic and not broken. Suitable for irregular places and small space to use, but also because of its arbitrary bending and winding, suitable for any combination of advertising in a variety of decorative patterns.
2, LED hard light bar is to use PCB hard board assembly circuit board, LED useful patch LED assembly, but also useful in-line LED assembly, depending on the need for different components. The advantages of the hard light bar is relatively easy to fix, processing and installation are more convenient; the disadvantage is not free to bend, not suitable for irregular places. 12 LED, 30 LED, 36 LED, 40 LED and so on a variety of specifications; with straight-through LED has 18, 24, 36, 48 And other different specifications, there are positive side, side light is also called the Great Wall light bar.
LED Strip Light LED lights with installation Note: LED lights with the wiring method LED lights with a general voltage of 12V DC, so the need to use the switching power supply, the size of the power according to the LED lights with the power and connection length to set. Monochrome 5050 patch LED lights with the wiring is to distinguish between positive and negative, we generally provide a good power plug welding, plug directly into the lamp with our power supply above, and then all the LED lights with input power all In parallel, unified by the total switching power supply. LED lights with installation Note: Controller connection way LED Marquee and RGB Symphony lights need to use the controller to achieve the effect of change, when the wiring.